Skip to content

Managing JV partners, co-sourcers and partner commission

By Dom Bryan, Founder · Published

To manage partners who send you deals, agree the split and what it is a share of before the first deal, review every deal with its evidence before your investors see it, and keep one record of what each partner is owed and what you have paid. Pay them yourself and write down when you did. Software can hold the split, the review and the running total. It does not move the money or write your agreement.

Who this guide is for

This is for you if

  • You run a hub or an investor list and take deals from other sourcers.
  • You source deals and want them in front of a bigger sourcer's investors.
  • You owe partners a share of your fee and track it in a spreadsheet or in your head.

It is not for you if

  • You want a joint venture agreement or a co-sourcing contract drafted. Ask a solicitor.
  • You want tax or VAT advice on fee shares. Ask your accountant.
  • You are an investor looking for a JV partner to buy with. This guide is about sourcers sharing deals and fees.

What is a co-sourcer or JV partner in deal sourcing?

A co-sourcer is another sourcer who shares a deal and its fee with you: one of you finds the deal and the other brings the investor.

Sourcers use "JV partner", "co-sourcer" and "partner" for the same arrangement. It usually starts because one side has more deals than buyers and the other has more buyers than deals. A newer sourcer sends deals to someone with a bigger list. A hub with a busy investor list takes deals from several smaller sourcers. Some pairs do both.

Kinmoot calls this Co-Sourcing. Each sourcer has a hub of their own, and co-sourcing is agreed between two hubs, one direction at a time.

What should you agree with a partner before the first deal?

Agree eight things, in writing, before either of you sends a deal.

  • Which way the deals go. You send them deals, they send you deals, or both. Treat each direction as its own arrangement, because the split is often different each way.
  • The split. One percentage of the sourcing fee for the sourcer who found the deal. Say whether it can change on a single deal and who has to agree when it does.
  • What the split is a share of. The fee actually received from the investor, not the fee on the listing. Then a discount or a part payment cannot start an argument.
  • Who deals with the investor. Who takes the enquiry, who runs the paperwork and who collects the fee. Usually that is the sourcer whose investor it is.
  • When the share is paid. On the fee landing, on exchange or on completion, and within how many days.
  • What happens on a refund. If the fee goes back to the investor, say whether the share goes back too.
  • What a deal must come with. The figures, the comparables, the quote for any works and the full address, so you can check the deal before your investors see it.
  • How either of you stops. What notice you give, and what happens to deals that already have an investor on them.

An email you have both replied to is better than a phone call nobody can quote. Whether you need a formal agreement is a question for a solicitor, not for this guide.

How do you split a sourcing fee with a partner?

Pick one percentage of the fee for the sourcer who found the deal, and apply it to the fee actually received.

Here is one split with round numbers. It is made up for this guide. The 40% is an example, not a going rate, and yours is whatever the two of you agree.

ExampleAmount
Sourcing fee on the listing£5,000
Fee received from the investor£5,000
Partner's share, agreed at 40%£2,000
You keep£3,000
If £2,500 is later refunded, the partner's share becomes 40% of £2,500£1,000
If you had already paid the £2,000, owed back to you£1,000

The last two rows are why "a share of the fee received" matters. If you agreed a share of the quoted fee, a refund leaves you paying a partner out of money you no longer have.

On Kinmoot the split is set when two hubs agree to co-source. The request names it as "Your share of the fee" or "Their share of the fee", depending on which way the deals go, and the other hub accepts it. Either side can propose a different split on a single deal. A deal shared at a split other than the agreed one always waits for a person on the receiving hub to approve it.

How should a partner send you a deal?

A partner should send each deal in one fixed format, with the evidence attached, to one place you review from.

Deals that arrive as voice notes and forwarded PDFs get retyped, and the figure you retype is the one that turns out wrong. Our guide to what happens after you post a deal covers the listing itself.

On Kinmoot it works like this:

  • Starting. On the Co-Sourcing page you choose "Request deals from a sourcer" or "Submit your deals to a hub". You find the other hub by its name, its owner's name or its owner's email, set the split and send the request. If they have no hub yet, you type their email and they get an invitation to set up a free hub of their own. A hub that takes deals also has a reusable invitation link.
  • Sending. The sourcer shares a deal from that deal's own page, under "Share with a partner hub". Only a live deal can be shared. They keep the deal, and any change they make to it shows on both hubs.
  • What the reviewer sees. While the deal waits, the receiving hub's reviewer sees the listing and its private record: the full address, the evidence, the files and the calculated returns. None of that goes on the public listing.

How do you review a partner's deal before your investors see it?

Check it the way an investor would, then give one of three answers: no, not yet, or yes.

Read the figures against the evidence. Is there something behind the end value, the rent and the cost of works? Is the price asking, target or agreed? Would you put your own name to it? It goes out under your brand, so your investors will treat it as yours.

On Kinmoot a shared deal waits on your Board with three buttons: Decline, Send back and Approve. Decline takes a reason, which goes to the other hub. Send back takes a list of what to change, one request on each line, and the deal returns to you once they have fixed it and resubmitted. Approve puts the deal live on your hub and accepts its split.

For a sourcer you trust, you can tick Recognise against their hub. With it on, your acceptance rules can approve their deals without a person checking each one. Leave it off until you have seen enough of their deals to know what they send.

How do you track what you owe a partner?

Keep one line for each deal: the fee received, the split, the amount owed, and the date you paid it.

A spreadsheet does this until you have several partners and a refund. Then the totals drift and you and your partner are each working from a different number.

On Kinmoot the hub whose investor it is runs the deal case and collects the fee. Each time a payment or a refund is recorded on that case, the partner's split is worked out again from the fee received. Both hubs see the same line, such as "£2,000: 40% of £5,000", marked "You owe this" on one side and "Owed to you" on the other. The Co-Sourcing page totals what you owe each hub and what each owes you.

When you have paid, either hub presses Mark settled. If a fee is refunded after that, the line changes to show how much is owed back.

If you have partners who post deals inside your hub, what you owe them is on the Commission page. You set one rule, a fixed amount per deal or a percentage of your sourcing fee, and it is recorded when you approve a partner's deal. The page shows Due now, Upcoming and Settled this year. You pay the partner directly, then mark it settled with a note such as the date and the bank reference.

How do you stop working with a partner?

Tell them, finish the deals that already have an investor on them, and settle what is owed.

On Kinmoot either hub can stop either direction, with "Stop taking their deals" or "Stop submitting to them". A deal with an open case stays live until that case closes, then comes down.

What does software do for this, and what does it not do?

Software can hold the agreed split, put every partner deal through the same review, and keep one running total that both sides can see. It cannot make the agreement for you or pay anyone.

  • Kinmoot does not move the money. You pay your partner directly. Mark settled is a record that you did. It is not a payment.
  • It records the split, not the rest of your arrangement. When the share is paid, how much notice you give and anything else on the checklist above is between the two of you.
  • It follows the fee recorded on the case. If a payment is never recorded there, no split appears.
  • It does not vet your partner or their deal. The review is yours. Recognise is your own assessment of a hub, not a check Kinmoot has made.
  • A deal that was co-sourced to you cannot be shared on to another hub yet. Only the hub that owns a deal can share it.

If you want partner deals arriving in one format with the split recorded for you, see how a Kinmoot hub works.

FAQs

Frequently asked questions

What is a co-sourcer?

A co-sourcer is another sourcer whose deal you sell to your investors, or who sells your deal to theirs. One of you finds the deal, the other brings the buyer, and you share the sourcing fee at a split you agreed beforehand.

How do you split a sourcing fee with a partner?

Agree one percentage of the fee before the first deal, and agree that it applies to the fee actually received, not the fee quoted. On a £5,000 fee at a 40% share, the sourcer who found the deal gets £2,000 and the hub that sold it keeps £3,000. That is an example, not a going rate.

Is there software for co-sourcers and deal submissions?

Yes. On Kinmoot co-sourcing is agreed between two hubs. A sourcer shares a live deal with a hub they co-source with, the receiving hub declines it, sends it back with requests or approves it, and an approved deal is live on both hubs. The split of each fee received is worked out and listed for both sides.

Does Kinmoot pay my partners for me?

No. No money moves through the co-sourcing or commission pages. You pay your partner directly, by bank transfer or however you have agreed, and then mark the split as settled so both records agree.

What happens to a partner's share if the investor is refunded?

On Kinmoot the split follows the fee received on the case, so a refund reduces it. If you had already marked it settled, the page shows the difference as owed back. Agree with your partner what happens on a refund before the first deal so the software is recording something you both expected.

Ready to get started?

Join the community of property sourcers and investors transacting across the UK. Free to list, free to register interest.

No listing fees Free for investors